The Best Way to Mend a Torn Fitted Sheet Might Surprise You

The best way to mend a torn fitted sheet is by using a fabric patch that matches the sheet’s color and material. Secure the patch with even and durable stitches to reinforce the tear and extend the sheet’s lifespan.

Mending a torn fitted sheet through patching is both practical and efficient. With several methods available, including hand sewing, machine sewing with fabric patches, iron-on patches and fabric glue, you can choose the approach that best suits your skills and the extent of the tear.

In some cases, the type of fabric the sheet is made of and the location of the tear might affect what choices you make. For example, if the tear will not be visible because it falls on the side of the mattress, you may be less concerned about making a patch blend into the fabric. 

In other cases, it may be about convenience and the supplies you have available. No matter what you choose, repairing a fitted sheet will save you money in the long run. It’s a great way to maintain the item’s usability and limit unnecessary spending. 

Gather Your Supplies

To mend a torn fitted sheet, you’ll need a few supplies to make the repair. Here’s a list of the items you should gather before getting started:

  • Sewing needle or sewing machine (handheld or full machine).

  • Thread.

  • Fabric scissors.

  • Pins or clips.

  • Iron and ironing board.

  • Patch or fabric swatch.

Cut a Patch

You’ll start by cutting a patch for the tear on the fitted sheet. Follow these steps:

  • Look for a piece of fabric that closely matches the torn fitted sheet in color, material and texture. It doesn’t have to be perfect, but it will look nicer if it blends in, especially if it’s in a highly visible location.

  • Assess the size of the tear by measuring its length and width. Add a few centimeters (or about an inch) to each side of the tear to ensure sufficient coverage by the patch.

  • Use fabric scissors to cut out a square or rectangular piece of fabric based on the measurements taken. Ensure the patch is large enough to cover the entire tear and extend slightly beyond it.

  • Achieve a smooth result by ironing both the patch and the sheet before attaching them together. This will help everything lie flat and facilitate easier sewing.

Pin the Patch in Place

Once you’ve cut the correctly sized patch, you’re ready to place it.

  • Place the patch (carefully) over the torn area on the fitted sheet. Make sure it is situated so the entire tear is covered.

  • Match the pattern and orientation of the patch with the surrounding fabric to ensure a seamless blend if applicable. If the fabric has a specific pattern or grain, align the patch accordingly.

  • Use sewing pins or fabric clips to secure the patch to the fitted sheet where you want it to go. Start by placing pins along the edges of the patch, ensuring it stays in position. Insert the pins perpendicular to the patch, going through both layers of fabric (the patch and the fitted sheet).

  • Add pins or clips at regular intervals around the patch. This will prevent the patch from shifting or bunching up while you sew it onto the sheet.

  • Consider laying the patch on the underside of the sheet, depending on the size of the tear and the type of fabric you are using for the patch. The tear will still be visible, but the patch fabric will be behind it. If it’s a large tear, this may be less noticeable than placing a large patch on top of the fabric. 

Sew the Patch Onto the Sheet

Now, you’re ready to sew the patch onto the sheet:

  • With the patch securely pinned in place, you can now sew it onto the fitted sheet using either a sewing machine or hand stitching. Choose a strong thread and an appropriate stitch type (a straight stitch for non-stretch fabric and a zigzag stitch for fabric with stretch) to get a durable repair.

  • As you sew, remove the pins or fabric clips one by one, making sure not to sew over them. Take your time to carefully sew along the patch’s edges.

Hand Sewing Method

  • After completing the stitches along the patch’s edge, make a few extra stitches in the same spot to secure the thread. Then, tie a knot close to the fabric and trim any excess thread.

  • Repeat the stitching process around all edges of the patch until it’s firmly attached to the fitted sheet. To avoid puckering the fabric, be sure to maintain tight stitches without overtightening.

Sewing Machine Method

  • Sew along all edges of the patch, guiding the fabric gently to maintain a straight line. If you come across corners, consider reinforcing them by sewing a few extra stitches in the same spot.

  • At the end of your sewing, backstitch a few stitches to secure the thread, and then cut it.

Trim the Excess Fabric

Use fabric scissors to carefully cut any protruding fabric along the edges of the patch, making sure not to cut into the patch itself, the stitching or the rest of the fitted sheet. Take your time and make precise cuts to achieve the best results.

Let Alsco Manage Your Sheets

Alsco offers a simple, cost-effective solution through our linen service—we’ll take away sheets that need to be laundered and replace them with freshly cleaned and folded sheets for you to use in their place. We’ll also remove any ripped or stained sheets that are no longer serviceable so you don’t have to patch your sheets again. 

Contact Alsco today to discover how our linen management solutions can meet your needs, freeing you to focus on other vital areas of the business and saving you time and money in the process.

References

Hand Stitches. Sewing. 

Mending of Tears in Fabric. (September 2018). Sew Guide.

Contact Us

Interested in Alsco's Services? Visit our Contact page and let us know!